Cleaners

Carpet Shampoo C940

Added by on November 19th, 2010, filed under Cleaners

Carpet Shampoo C940 For Carpets and Upholstery

Carpet shampoo C940 cleans and deodorizes rugs, carpets and upholstery, designed for machine application. Leaves carpets and upholstery with a clean, fresh fragrance. It deodorizes by removing the source of offensive odors.

Carpet shampoo C940 can be used in all types of shampooing equipment. Use it as a spot cleaner, too. It works equally well in hand or soft, warm or hot water. After cleaning, it leaves an invisible protective film on carpet and upholstery fibers which help to keep dust and soil from penetrating into the fabric for easy maintenance cleaning.

FOR UPHOLSTERY
Powerful Cleaning Action
Carpet shampoo C940 has special detergent properties and extra dense scudding action to penetrate to soils below the surface. The strong scudding action suspends and floats away the dissolved soils for easy removal by vacuum. Brings out the original colors, leaves a “like new” look.

Anti Soiling Ingredients
Carpet shampoo C940 has improved capabilities for soil suspension and for retarding future soil buildup. The anti-soiling effect makes for easier and more complete cleaning during vacuuming.

BENEFITS OF CARPET SHAMPOO:

  • Leaves an invisible protective film on carpet and upholstery fibers
  • Cleans and deodorizes carpets and upholstery
  • Can be used in all types of shampooing equipment
  • Works equally well in hand or soft, warm or hot water

DIRECTIONS OF USE:

TO SHAMPOO CARPETS:

  1. Remove furnishing from area to be cleaned. Place furnishing which will remain in contact with wet carpet on aluminum foil strips to prevent rust spots.
  2. Vacuum carpet thoroughly (use a beater-type vacuum for best results).
  3. For periodic, deep shampooing: Mix 8 oz of C – 940 carpet shampoo per gal. Of warm (100Deg–120 Deg F) water. Fill shampoo machine tank. Apply approximately 1 gal. Of solution per 100 sq.ft. Of carpet.
  4. Scrub carpet using machine. Make parallel overlapping passes in one direction. Repeat, scrubbing in a pattern crosswise to first scrub pattern. For heavily soiled areas, additional brush action is preferred to excessive wetting.
  5. Vacuum when dry.

LIGHT SOIL CLEANING:

  1. Vacuum carpet thoroughly (use a beater – type vacuum for best results).
  2. Fill sprayer, equipped with a special nozzle for carpet shampoo application, with 8 oz. (1 cup) of carpet shampoo per gal. of warm (100 deg – 120 deg F) water.
  3. Pump sprayer to full pressure (approximately 60 strokes).
  4. Spray carpet with slow, overlapping passes to cover approximately 100 sq. ft. in 4 minutes, applying approximately 24 oz. (1 ½ pt) of the solution.
  5. For more effective cleaning, immediately work the solution into the carpet with a suitable scrubbing machine. Apply machine action in one direction and repeat crosswise.
  6. Vacuum when dry.

TO CLEAN UPHOLSTERY:

  1. Prepare a solution of oz. (2 cups) carpet shampoo per gal. of water.
  2. Work the solution into fabric using a bristle brush. Do not over – wet the fabric. Apply approximately 5 oz. of solution per square yard.
  3. Vacuum when dry.

HANDLING AND CARE:

FOR INDUSTRIAL USE ONLY. DO NOT MIX WITH ANYTHING BUT WATER.
CAUTION: Contains anionic wetting agents and resins. Harmful if swallowed. Protect eyes and mucous membranes from contact with this product and solutions of it. Can cause irritation.

Enjoyed this Post?

Recommend us to your businesses and friends. Like us on Facebook.

What do you think?